The TC2 heat press shows up with the right press for the introduction into textile finishing.
On the digital controller of the TC2 time and temperature for the transfers can be set.
After the transfer is done, an acoustic signal sounds.
The contact pressure is adjusted by a hand wheel on the upper side of the heating plate.
The pressing operation starts when the pressing lever is closed.
The large opening angle allows comfortable preparing of the transfer objects on the base plate.
The TC2 has a working area of 23cm x 33cm and a heating plate with a power consumption of 1.000W.
|dimensions ||34cm x 40cm x 46cm |
|pressure setting ||the heating plate can be adjusted with a hand reel |
|net weight ||19 kg |
|working area ||23cm x 33cm |
|max. working pressure ||150 g/cm² |
|max temperature ||255 °C |
|maximum time preset ||999 s |
|power supply ||230V / 50Hz - 60Hz, 1,0kW |
|environment ||5°C - +35°C / 30% - 70% humidity |
|folding angle ||0 ° - 45 ° |
|locking system ||manual toggle lever |
|Brand ||Secabo |
|Your Price: ||£209.00|
|List Price: |£230.00
|Saving Of: ||£21.00|